Sistas LASER Apparel Transfers
- 11 inch laser transfer
- Laser transfers can be used on just about any garment material 100% cotton, 50/50 blends, triblends, polyester
- You must use a heat press with these transfers
- 3 business day processing time
Pressing instructions:
Step 1: Pre-press your garment for a few seconds to remove moisture and wrinkles. (Use a lint roller to remove lint)
Step 2: Cut around the design to remove any white glue near the edges of the sheet.
Step 3: Center your design on the garment and press at 310F for 15-25 seconds. (Do NOT use teflon sheets for this step) TIP*** for polyester tees, press at 270 for 40 seconds
Step 3: Remove the garment from the heat press and allow to completely cool prior to removing the transfer sheet (ie cold peel)
Step 4: Slowly remove the transfer sheet away from the design by rolling the carrier sheet.
Step 5: Cover and repress for 15-25 seconds with non wax parchment paper. (This step seals the design.)
Step 6: Enjoy your new garments.
Step 2: Cut around the design to remove any white glue near the edges of the sheet.
Step 3: Center your design on the garment and press at 310F for 15-25 seconds. (Do NOT use teflon sheets for this step) TIP*** for polyester tees, press at 270 for 40 seconds
Step 3: Remove the garment from the heat press and allow to completely cool prior to removing the transfer sheet (ie cold peel)
Step 4: Slowly remove the transfer sheet away from the design by rolling the carrier sheet.
Step 5: Cover and repress for 15-25 seconds with non wax parchment paper. (This step seals the design.)
Step 6: Enjoy your new garments.